The small nozzle can be heated from normal temperature up to 250 ℃ in approx. 5 seconds.

Because of the small masses of the nozzle and manifold, required heat usage can be reduced.

The electricity usage is only 20-50% less than that of electric resistance heating systems.

With the system we developed through our own experience and know-how, the internal temperature of the manifold can be freely adjusted.

The 614 Hot Runner System does not adopt the self-heating method such as electric resistance heating.

Because the coil itself is just to generate Eddy currents, the 614 Hot Runner System makes it possible to reduce troubles such as wiring disconnection even in use at high temperature ranges.

There is an air gap placed in the nozzle. Functioning as a heat insulating layer, the air gap suppresses the heat effect on the mold.

The 614 Hot Runner System reduces pressure losses inside the system, adopting the external heating method, precise temperature control techniques and a simple structure.

By adopting the external heating method, there is no part where the resin is left over of a manifold.

This makes it easy to change color and resin.

By using the compact-sized nozzle and manifold, the hot runner system can be utilized without enlarging the mold, which consequently makes it easy to be installed or arranged.

Since the tip of the nozzle directly contacts the cavity, a thin seal is put immediately before the gate to make the sealing process more reliable.

The gate opens quickly in seconds.  The ΔT-button is used when the system is in the process of starting up, purging, etc.